Trowelable Wood Filler

A safe, non-flammable, water-based product for use across an entire wood floor. This water-soluble product fills nail holes and covers other minor imperfections in bare and unfinished wood. It has a fast dry time, blends and adheres well to wood, sands easily and absorbs stain similarly to wood.

Downloads

Colors Sizes PROD. NO. QTY PDS GHS SDS
Walnut GAL 832270000 2
Brazilian Cherry GAL 832250000 2
Maple Ash Pine 3.5 GAL 83206000 1
Red Oak 3.5 GAL 83205000 1
White Oak 3.5 GAL 83204000 1
Maple Ash Pine GAL 83203000 2
Red Oak GAL 83202000 2
White Oak GAL 83201000 2

APPLICATION DIRECTIONS

DIRECTIONS

SURFACE PREPARATION: Surface must be free of dust, oil, wax and moisture.

APPLICATION

  1. Pour moderate amount of DuraSeal® Trowelable Wood Filler in needed area.
  2. Press filler into cracks and holes using an even-edge trowel.
  3. Allow to fully dry before doing final sanding.
  4. Sand surface to remove excess DuraSeal® Trowelable Wood Filler.

CAUTION

May cause slight irritation to individuals with sensitive skin. Wash thoroughly after use.

CLEAN-UP

Clean with water while Wood Filler is still damp.

STORAGE

Keep containers tightly closed. Keep from freezing. If freezing occurs, thaw at room temperature for a minimum of 8 hours before using.

PHYSICAL PROPERTIES

Density (lbs/gal) 14.0
% Solids 71.0
Viscosity – CPS 640,000
pH 8.4
VOC (b/l) Zero
Flash Point N/A

CAUTION

WARNING

This product contains a chemical known to the State of California to cause cancer.

KEEP OUT OF REACH OF CHILDREN.

DO NOT TAKE INTERNALLY.

HMIS RATING
Health 1
Flammability 1
Reactivity 0