Premium Polyurethane+
An oil-based, premium finish formulated for professional application and large area coverage. DuraSeal Premium Polyurethane+ has remarkable resistance to chipping and peeling and is especially suitable for use on virtually all interior surfaces, finished or unfinished. Available in satin, semi-gloss and gloss she
Downloads
| Sheens | Sizes | PROD. NO. | QTY |
|---|---|---|---|
| Satin | QT | 00P835613-44 | 4 |
| Satin | 5 GAL | 00P835613-20 | 1 |
| Satin | GAL | 00P835613-16 | 4 |
| Semi-Gloss | QT | 00P835611-44 | 4 |
| Semi-Gloss | 5 GAL | 00P835611-20 | 1 |
| Semi-Gloss | GAL | 00P835611-16 | 4 |
| Gloss | QT | 00P835610-44 | 4 |
| Gloss | GAL | 00P835610-16 | 4 |
APPLICATION DIRECTIONS
SURFACE PREPARATION
WOOD FLOORS: Complete removal of finish: Using a power floor sanding machine, remove old finish (if any) and sand floors bare and smooth. For final sanding, use only 100-grit paper. Never use paint removers to remove finish on floors; power sanding is the only recommended way to remove old finishes from floors. Before applying finish, floor must be free of dust, dirt, wax, grease, oil, etc.
FOR APPLICATION OVER STAIN: Not recommended over white or pastel stains. Allow stain to dry 24 hours before recoating with finish. A light sanding of the stain with very fine sandpaper before application of the finish is recommended. For maximum body, to seal out natural rosins, and/or for the lightest possible natural wood color, apply 1 coat of DuraSeal® Quick Dry Sealer to bare unstained wood, according to directions.
OTHER WOOD SURFACES: Whether old work (previously finished) or new work (bare wood) surface must be clean, smooth, wax-free, dust-free and dry.
APPLICATION
Stir thoroughly before and during use. Do not agitate or machine shake. Apply 2 coats evenly with a clean brush or lambswool applicator. Allow to dry. Sand first coat lightly with 100-grit paper; wipe with tack rag to remove all dust before applying second coat. If a third coat is required, wait at least 4 days before applying. Use the same procedure as above if a third coat is applied.
CLEAN UP/DISPOSAL
Clean brushes and tools with a regionally compliant cleaner following manufacturer’s safety instructions. Wash hands with soap and water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.
COVERAGE
Approximately 46.5 m2 (500 sq. ft.) per gallon.
FIRST AID
In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
PHYSICAL PROPERTIES
| Color |
|
|
| Solids | 38% by volume & 45% by | |
| Viscocity | 30 seconds/Ford Cup | |
| Coverage | 500 sq. ft./gallon | |
| Number of Coats | 2 to 3 | |
| Leveling | Excellent | |
| Defoaming | Excellent | |
| VOC | <550 | |
| Dry Film Thickness | 1.5-1.75 mil/coat | |
| Freeze/Thaw Stable | Yes | |
| Shelf Life | 36-60 Months | |
| Cleanup | Mineral Spirits | |
| Storage |
|
|
| Working Temperature | Minimum 50 ˚F | |
| Applicator | T-bar, roller, brush or lambswool | |
DRY TIME (@ 77 ˚F AND 50% RELATIVE HUMIDITY) |
||
| Recoat | 8 hours | |
| Foot Traffic | Overnight | |
| Return to Service | 3 days | |
| Full Cure | 30 days | |
| Furniture and Rugs | 30 days | |
GLOSS LEVEL (@ 60) |
||
| Satin | 20 | |
| Semi-Gloss | 50 | |
| Gloss | 85 |
CAUTIONS
WARNING
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.